Dreamers and High Pigment Gel Nail Art

 

Summer is fast approaching (yay!) so we've put together some nailspiration to get your creativity flowing. Combining fresh shades from our SS18 Dreamers Collection with our High Pigment Gels, Essence Glitters and nail art accessories, these designs are sure to impress. 

 

1. Apply a Bio Sculpture Base layer - Cure
2. Apply a layer of No.227 - Cure
3. Using your Upper Arch Brush, apply thin lines of No.223 curing each line.
4. Draw three circles in the corner using No.226 - Cure
5. Draw thin white lines to form the rose effect using No.3 - Cure
6. Apply Bio / Evo Gloss Gel for shine - Cure

 

1. Apply a Bio Sculpture Base layer - Cure
2. Apply two layers of colour gel - Cure each layer
3. Select different shades of Bio Sculpture Gel to create the cone using an Upper Arch Brush. Cure between applications. Repeat until the desired effect is achieved
4. Apply a layer of Strengthening Gel - Cure
5. Cleanse
6. On a Metal Plate mix a blue, yellow, purple and red High Pigment Gel with White Screed
7. Use an Upper Arch Brush to apply the different 2D layers of mixed colour, creating the ice-cream - Cure each layer
8. Repeat step 7 until the desired 2D effect is achieved
9. Apply Bio / Evo Gloss Gel for shine - Cure

 

1. Apply a Bio Sculpture Base layer - Cure
2. Apply two layers of colour gel - Cure each layer
3. Follow with a layer of Soft Gel - Cure and wipe
4. Select a light colour High Pigment Gel. Dab the tip of a Puffer into the High Pigment Gel, apply product to the side of the nail and softly blend towards the middle of the nail - Cure
5. Apply the appropriate strengthening Gel and seal the nail art - Cure
6. Cleanse nail. Refine if necessary
7. Create the patterned design using an Upper Arch Brush and Soft Gel - Do not cure
8. Cautiously pour glitter over the wet gel design. Turning the finger upside down, tap to remove the excess glitter onto a sheet of paper - Cure
9. Gently brush away remaining loose glitter

Note: Bio / Evo Gloss Gel may be added to seal the design if a glossy, smooth finish is required

 

 

1. Apply a Bio Sculpture Base layer - Cure
2. Apply two layers of a white colour gel - Cure each layer
3. Use No.225 with an Upper Arch Brush to draw three triangular patterns on the nail - Cure
4. Follow with a layer of Soft Gel - Cure, wipe and lightly refine
5. Randomly place black striping tape across the nail in different directions
6. Repeat step 5 using gold striping tape
7. Follow with a layer of Soft Gel - Do not cure
8. Place the pearls on the wet gel using the tip of a Stainless Steel Orange Stick, dipped into Soft Gel - Cure
9.Apply a layer of Soft Gel to seal around the nail art - Cure
10. Cleanse
11. Apply Bio / Evo Gloss Gel for shine - Cure

 

 

We love seeing your creative nail art designs. Don't forget to share them with us on Facebook @biosculpturegelgb and Instagram using #biosculpturegelgb and #biosculpture